Scallop Stitching; Twin Needle - Silvercrest SNM 33 A1 Bedienungsanleitung

1

Scallop stitching

This machine automatically produces a
scallop stitch which may be used as
decorative edging.
- Sew the scallop stitch along the edge of the
- If desired, trim around the scallop with
2

Twin needle

- Make sure that the two threads used to
- Insert the twin needle in the same way as
- Follow instructions for single needle
18
Stitch Stitch width Stitch length
I 3~5
material. (1)
scissors to create a scalloped edge. Be
careful not to cut the thread. (2)
Stitch Stitch width Stitch length
A 2.5
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
a low speed to insure quality stitching.
When using twin needle on zig-zag make
sure the stitch width dial is set between "0"
and "3". Do not use twin needle at setting
above "3".
thread the twin needle are of the same
weight. You can use one or two colors.
single needle. Flat side of needle should
face away from you.
threading. Thread each needle separately.
Silver Crest SNM 33 A1
1~2
1~4