Scallop Stitching; Twin Needle - Silvercrest SNM 33 B1 Bedienungs- Und Sicherheitshinweise

Scallop stitching

1

Twin needle

1
Stitch
You can produce a decorative edge with the
scallop stitch.
1. Sew the scallop stitch along the edge of
the material.
2. If desired, trim around the scallop with
scissors to create a scalloped edge. Be
careful not to cut the thread.
2
Stitch
Please note:
Set the stitch width before starting to sew.
Carefully turn the hand wheel (20) to
check that the twin needle enters the stitch
hole without touching or even striking the
stitch plate (8) or pressure foot.
When sewing with a twin needle (j) always
advance and sew slowly to ensure quality
stitching.
When sewing with a twin needle both
threads must be of the same weight. You
h
can use one or two colours.
1. Insert a spool (m) as usual onto the spool
pin (14) and secure with a spool pin cap
(r).
2. Insert the secondary spool pin (q) into
the hole provided for this purpose (21)
on the top of the sewing machine. Place
the felt cushion (h) on the secondary
spool pin (q). Next insert another spool
(m) on the secondary spool pin.
3. Insert the twin needle (j).
4. Thread both threads as usual.
5. As the last step, thread one thread
through the left needle and the other
through the right needle.
Sewing basics
Stitch width Stitch length
I 3~5
Stitch width Stitch length
A 2.5
1~2
1~4
GB / IE 67