Storage; Troubleshooting - Silvercrest SHGD 40 C1 Bedienungsanleitung

Storage

■ When the appliance is cooling down, always place it on a heat-resistant
surface or hang the appliance up by the suspension loop.
If you do not intend to use the appliance for some time:
■ Clean the appliance as described in the section "Cleaning".
Press the hotplates 6 together and then press the locking device 4 on the
■
side
■ Store the appliance at a clean and dry location.

Troubleshooting

The appliance does
not function.
The hair cannot be
straightened.
The hair is singed.
SHGD 40 C1
in.
Problem Cause
The plug is not
Connect the appliance
inserted into
a mains
power socket.
The mains power
socket is defective.
The appliance is
defective.
The appliance is
not switched on.
The temperature
level is set too low
for your hair.
The appliance is Wait until the appliance
not yet heated up.
The temperature
was too high.
The hair has been
held for too long
between the
hotplates 6.
prolonged period at a
specifi c point on the hair.
Solution
with a mains
power socket.
Try another mains
power socket.
In this case, contact
Customer Services.
Switch the
appliance on.
Select a higher
temperature level.
has heated up.
Select a lower
temperature level.
Always pull the hair
straightener through
the hair.
Never linger for a
GB
45