Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB/IE
Hint:
The roller bases
table loading surface
subsequently adjust the roller bases
the furniture piece.
Shunting furniture
1.
Adjust the roller bases
face in the same direction.
2.
Pull/push the furniture piece to the desired loca-
tion with the assistance of the roller bases
Removing the roller bases
Hint:
To avoid uneven lifting, always take into account
the load centre of gravity and place the lever
arm
on the side to be lifted.
1.
Push the swivelling head
under the furniture and in the middle of it.
Hint:
Hold the lever arm
With this you will require the least effort.
2.
To lift the furniture, slowly press the lever arm
down.
3.
Hold the lever arm
4.
Remove the roller bases
5.
To lower the furniture piece, slowly lift the lever
arm
.
6.
Remove the lever arm
7.
Repeat the above procedure for the opposite
side of the furniture piece.
are each fitted with a rota-
. With these you can
under
so that the wheels all
of the lever arm
at the hand grip
.
pressed down.
.
.
Troubleshooting
The furniture piece is very difficult to shunt.
• Adjust the roller bases
wheels are facing in the same direction.
The furniture piece tips easily.
• Place the four roller bases
corners of the furniture piece. Thereby, the furni-
ture piece should be positioned completely over
.
the four roller bases
Cleaning
Important
It is possible to damage the lever arm
the four roller bases
For cleanng the lever arm
bases
NEVER use spirits, solvents or detergents
that can attack plastics.
Clean the lever arm
only with a moist cloth.
Storage
In each of the roller bases
these holes the roller bases can be hung for
example on a pinboard for hand tools.
The furniture transport set can also be stored in its
original packaging.
- 4 -
so that all of the
under the extreme
.
by cleaning it.
and the four roller
and the four roller bases
there is a hole. With
and
Werbung
Kapitel
Inhaltsverzeichnis
