Power Management Function; Hints And Tips - Electrolux EHL6740F9K Benutzerinformation

To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch
comes on and goes off.
3. Touch
comes on.
4. Touch
5. Touch
power level.
Power levels
Refer to "Technical information" chapter.
• P0 — 7200 W
• P1 — 1500 W
• P2 — 2000 W
• P3 — 2500 W
• P4 — 3000 W
• P5 — 3500 W
• P6 — 4000 W
• P7 — 4500 W
• P8 — 5000 W
• P9 — 6000 W
4.14 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob (see illustration).
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking zones

5. HINTS AND TIPS

for 3 seconds. The display
for 3 seconds.
. P0 comes on.
/ of the Timer to set the
CAUTION!
Make sure that the selected
power fits to the house
installation fuses.
WARNING!
Refer to Safety chapters.
connected to a single phase exceeds
3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the reduced
zones changes between two levels.
or
Power management function with
Power limitation function
When you set the Power limitation function
to 4.5 kW or less, power of the hob is
divided between all cooking zones.
When you set the Power limitation function
to more than 4.5 kW, power of the hob is
divided between two cooking zones in a
pair.
5.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
ENGLISH 11