Getting Started; Checking The Package Contents; Battery Installation In The Remote Control; Battery Replacement - Yamaha RX-V520RDS Bedienungsanleitung

Checking the Package Contents

Check that the following items are included in your package.
Remote control
Battery Installation in the Remote
Control
1
3
1
Turn the remote control over and slide the
battery compartment cover in the direction of
the arrow.
2
Insert the batteries (AAA, R03 or UM-4 type)
according to the polarity markings on the
inside of the battery compartment.
3
Close the battery compartment cover.

GETTING STARTED

Batteries (AAA, R03, UM-4 type)
Indoor FM antenna
75-ohm/300-ohm antenna adapter
(U.K. model only)
2
AM loop antenna
Quick reference card
Connection guide

Battery Replacement

If the remote control operates only when it is close to the
unit, the batteries are weak. Replace all the batteries with
new ones.
Be sure to replace the batteries within about two minutes.
If it takes longer than two minutes, the codes preset for
the remote control will return to the factory settings.
Notes
• Use only AAA, R03 or UM-4 batteries for replacement.
• Be sure the battery polarity is correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control will not be used for an
extended period of time.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
3