Led's And Their Meaning - XciteRC #15001300 Rocket 400 Bedienungsanleitung

LED'S and their meaning

LED's and their meaning
In the tailpiece there are placed two LED's to control the GPS-status (green), Magnetometer (yellow) and the
calibration display (red). More of them are below the Quadrocopter pipes to display the flight attitude and the
battery condition.
Indicator light for Binding, motor lock/
unlock (red LED)
Magnetometer calibration (yellow)
GPS signal (green LED)
Tail-LED's:
red green
blinks slowly
on
blinks
on
blinks
WARNING: If the green LED blinks, all GPS-supported modes (Position-Hold, Altitude-Hold and Coming-
Home) mustn't be used for the model receives no sufficient GPS-signal and is unable to determine its positi-
on – danger of falling! Also without function is the Failsafe Coming-Home!
Quadrocopter pipes-LED's:
red = front green = tail
on on
blinks blinks
Battery warning: If the LED's do blink and simultaneously an acoustic warning signal is to be heard the
model is to land instantly – danger of falling!
Regard: If the battery voltage drops to 10.2 – 10.4 V, the LED's will slowly start to blink. From this moment on
XciteRC Rocket 400 GPS
yellow Function
Calibration is performed/motors locked
Calibration is performed/motors unlocked
GPS-search or less than 6 satellites receivable
GPS: more than 6 satellites/GPS ok
blinks Calibration needed
green LED (rear)
red LED (front)
Normal operation
Battery warning
EN
23