Herunterladen Inhalt Inhalt Diese Seite drucken

Interior Fittings; Bottle Holder; Ice Cube Tray; Sticker "Ok - Siemens KI22LED30 Gebrauchsanleitung

Kühl- und gefrierkombination
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
en

Interior fittings

(not all models)
Glass shelves
Fig. '
If required, you can vary the shelves
inside the appliance: To do this, pull out
shelf, lift at the front and take out.
Extendable glass shelf
Fig. (
The extendable glass shelf can be pulled
out for a better overview of the food.
Vario shelf
Fig. )
To facilitate the storage of tall items (e.g.
cans or bottles), the front part of the
Vario shelf can be taken out and pushed
under the rear part.
Vario door shelf
Fig. *
The position of the Vario door shelf can
be moved to the side so that tall bottles
can be stored on the lower shelf.

Bottle holder

Fig. +
The bottle holder prevents bottles
from falling over when the door
is opened and closed.
34

Ice cube tray

1. Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
2. If the ice cube tray is stuck
to the freezer compartment, loosen
with a blunt implement only (spoon-
handle).
3. To loosen the ice cubes, twist the ice
cube tray slightly or hold briefly under
flowing water.

Sticker "OK"

(not all models)
The "OK" temperature monitor
can be used to determine temperatures
below +4 °C. Gradually reduce
the temperature if the sticker
does not indicate "OK".
Note
When the appliance is switched on,
it may take 12 hours until
the temperature is reached.
Correct setting

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis