Switching On The Appliance; Operating Tips - Siemens KI22LED30 Gebrauchsanleitung

en
Controls
Fig. "
1
On/Off button
Serves to switch the whole
appliance on and off.
2
"super" button
Switches Super function on and
off (see chapter "Super function").
It is lit when the Super function is
switched on.
3
Temperature selection button
Press this button to set the
temperature.
4
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
28
Switching on the
appliance
Fig. "
Switch on the appliance with the
On/Off button 1.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.

Operating tips

After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
While the refrigeration unit is running,
■
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects
in the drainage channel and is carried
to the refrigeration unit where it
evaporates. Fig. #
The front sides of the housing are
■
partly heated slightly. This prevents
condensation in the area of the door
seal.