What To Do If; Installation - Zanussi ZOU30601 Benutzerhandbuch

What to do if...

Warning! Refer to the Safety chapters.
Problem
The cooking zones do not operate.
The appliance does not operate.
The appliance does not operate.
The oven lamp does not operate.
Steam and condensation collect
on the food and in the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to the Safety chapters.
Building Under
Warning! Only a qualified and competent
person must do the installation of the
appliance. If you do not contact a qualified or
competent person, the guarantee becomes
invalid if there is damage.
• Before you install the appliance, fit it with the
applicable hob from the table.
Type
ZEV6040
ZEV6041
ZEV6046
www.zanussi.com
Possible cause
The appliance is not activated.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the oven for
too long.
Maximum power
6000 W
6400 W
7600 W
Refer to the user manual for the hob.
Activate the appliance. Refer to
the chapter "Daily use".
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
Replace the oven lamp.
Do not keep the dishes in the
oven for more than 15 - 20 mi-
nutes after the cooking ends.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity.
.........................................
.........................................
.........................................
Electrical connection with the hob
The hob connection socket is at the top of the
oven cabinet. The hob has connection leads for
the cooking zones and the ground cable. The
leads have plug-in connectors. To connect the
hob to the oven, plug the connectors into the
correct oven sockets. The design of the plugs
and sockets prevents incorrect connections.
Remedy
15