IKEA MOLNIGT Handbuch Seite 9

ENGLISH
Charcoal filter maintenance (if the hood is
installed in recirculation mode)
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease filter
3. Remove charcoal filter holder
4. Remove/add charcoal filter
5. Fix metal wire to keep the charcoal filter
in the correct position
6. Hook the carbon filter firstly to the metal
tab at the back on the hood.
7. Fix it at the front with the two knobs.
8. Refit the grease filter.
Unlike traditional charcoal filters, this
charcoal filter can be washed and
reactivated.
With normal hood use, the filter should
be cleaned once a month. The best way
to clean the filter is in a dishwasher at
the highest temperature possible, using
a normal dishwasher detergent. To avoid
particles of food or dirt settling on the
filter during washing and giving rise to
unpleasant smells, it is advisable to wash
the fi lter on its own. After washing, dry the
filter in the oven at 100°C for 10 minutes to
reactivate it.The filter will retain its odour-
absorbing capacity for three years, after
which it will have to be replaced.
Lamp maintenance
Disconnect the hood from the electricity.
Warning
Prior to touching the light bulbs ensure they
are cooled down.
1. Use a small screwdriver or other suitable
tool to prise off the cover.
2. Snap-fit the cover back on.
3. Use only max 12V-10W- G4 halogen
bulbs.
IMPORTANT: make sure you don't touch the
lamp with your bare hands.
9