IKEA LAGAN Handbuch Seite 13

ENGLISH
Caution! Do not use the
appliance without the internal
glass panel.
1
Open the door fully
and hold the two
door hinges.
3
Close the oven door
halfway to the first
opening position.
Then pull forward
and remove the
door from its seat.
5
Release the locking
system to remove
the internal glass
panel.
2
Lift and turn the
levers on the two
hinges.
4
Put the door on a
soft cloth on a
stable surface.
6
90°
Turn the two
fasteners by 90°
and remove them
from their seats.
7
2
1
First lift carefully
and then remove
the glass panel.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones is
not rough when you touch it.
Make sure that you install the internal glass
panel in the seats correctly.
13