Heating Milk - Melitta CAFFEO SOLO & perfect milk Bedienungsanleitung

9

heating milk

Prerequisite: the appliance must be ready for operation (see „switching on
and off" on page 56).
You can use the Cappuccinatore to heat milk directly from the milk carton or from a
vessel.
• Submerse the Cappuccinatore hose directly in the milk.
• Place a cup under the Cappuccinatore.
• Press the button for steam dispensing
→ The standby symbol
symbol
Warning!
there is a risk of burn injuries and scalding due hot steam and the hot
steam pipe.
– Never reach into the escaping steam.
– Never touch the steam pipe during use or immediately after use.
• Turn the control dial (Fig. F, No. 3) to the „Warm milk" position.
The „Warm milk" function is active when the
dial points upwards.
Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the
•
valve.
→ The valve symbol
• When you have dispensed the desired quantity of warm milk, turn the
valve switch (Fig. A, No. 11) anti-clockwise to the stop to close the
valve.
• Rinsing the cappuccinatore: Proceed as described on page 61.
62
is fl ashing. The appliance heats up. Then the valve
illuminates.
fl ashes.
.
symbol on the control