Preparing Milk Froth And Warm Milk; Preparing Hot Water; Preparing Beverages With Recipes (Barista Ts Model Only); Changing Beverage Settings Before And During Preparation - Melitta BARISTA T Smart Bedienungsanleitung

5.3 Preparing milk froth and
warm milk
The preparation of milk froth and warm
milk is similar.
Requirement: Milk is connected.
1. Place a vessel beneath the outlet.
2. Press the "Milk froth/milk" button.
a) Milk froth = briefly press button
b) Warm milk = press the button for
longer (2 seconds)
» Milk dispensing begins.
» The display shows: Easy Cleaning?
(OK for start).
3. Remove the vessel.
4. Run the Easy Cleaning programme or
prepare another beverage and then
carry it out, see section 9.4, page 57.

5.4 Preparing hot water

1. Place a vessel beneath the outlet.
2. Press the "Hot water" button.
» Hot water dispensing begins.
3. Remove the vessel.
5.5 Preparing beverages with
recipes (BARISTA
only)
Information
When selecting a recipe with milk, connect
the milk container or a commercially avail-
able milk pack.
The direct starting of recipes is similar for
all beverages. The selection of a lungo is
described as an example here.
Requirement: The appliance is ready
for operation.
1. Place a vessel beneath the outlet.
2. Press the "My Coffee/Recipes" button
until the Recipes profile appears and
confirm with "menu/ok".
3. Use the arrow buttons to select Lungo
4. Remove the vessel.
5.6 Changing beverage set-
Beverage settings can be changed before
and during beverage preparation.
These settings only apply to current bever-
age preparation.
Changing beverage settings before
preparation
The bean type, the total beverage quan-
tity, the coffee strength and the coffee
flavour can be changed before selecting a
beverage.
The coffee flavour is set with the Intense
TS model
aroma function. STANDARD and INTENSE
are available for selection. In the INTENSE
setting, the brewing time is longer and the
coffee has a more intense aroma.
ƒ
ƒ
Preparing beverages
» The recipe selection appears on the
display.
Alternatively, you can also press the
"My Coffee/Recipes" button for 2
seconds to access the recipe selection
directly.
and confirm with "menu/ok".
tings before and during
preparation
Information
Information
Select a bean type with the
"BEAN Select" button (BARISTA TS
model) or with the "Bean Select" slider
(BARISTA T model).
STANDARD
INTENSE
14:38
Before selecting a beverage, use the
"Beverage quantity" slider to set a bev-
erage quantity.
49