Installation Instructions For Stacking; Replacement Of Lamp - Samsung CM1919A (1850 WATT) Bedienungsanleitung

INSTALLATION INSTRUCTIONS FOR STACKING

Important
1. Disconnect the power cord from the wall socket before attempting
installation.
2. For stacking installation, you must use the "bracket plate" which is
enclosed with this unit.
3. The maximum stacking height is two units.
Stacking the two units is limited to the following models.
CAUTION : Be sure the oven cavity is empty.
Installation
1. Stack two units together.
2. Remove 6 screws as shown in the figure.
3. Place the Bracket-plate to join the two units.
4. Attach and tighten 6 screws as shown in the figure here.
5. Ensure the top oven is at a safe and workable height.
Bracket-Plate
CM1519A_XEU_04029B_EN.indd 12

REPLACEMENT OF LAMP

Important
1. Remove a screw securing the lamp cover.
You don't need to remove outer panel to replace lamp.
2. Remove the lamp by rotating it clockwise.
3. Replace with a new lamp by rotating it counter-clockwise.
Screw
12
Lamp
Lamp Holder
Cover
Lamp
Outer (230V 25W)
Panel
2011-07-13 9:45:17