Litecraft TPiX.7 Bedienungsanleitung Seite 25

display funktion
Information Device ID
<********>
******** = device­id
DMX Address DMX Address
<***> <***>
*** = DMX­adress
display funktion
DMX Channel Channel
<****> **** =
< 5 Ch>
<49 Ch>
<54 Ch>
Master/Slave Master/Slave
<******> <******>
****** =
<Master>
<Slave >
Temperature Temperature
<****> <*****>
***** = fixture­temperature
Ethernet Protocol
Setting <Kling­Net>
<Art­Net>
IP Mode
<******>
****** =
<Static>
<DHCP>
<Manual>
Net
<***>
*** = 0­127
Subnet
<**>
** = 0­15
Universe
<**>
** = 0­15
Start Channel
<***>
*** = 1­512
Minimum Dimmer Minimum Dimmer
<***>
*** = 0­100
display the device­ id
display the DMX­adress
( 5 Ch = <001­508>)
(49 Ch = <001­464>)
(54 Ch = <001­459>)
(default setting = 1)
setting DMX­channel mode
(description of modes in next chart)
(default setting = 5 Ch)
setting working mode
(Master: control without external
controller)
(Slave: control with external controller)
(default setting = Slave)
display the inside fixture­temperature
Kling­Net: selection of Kling­Net­protocol
Art­Net: selection of Art­Net­protocol
setting ip­adress mode
Static: static ip­adress
DHCP: fetching ip­adress supplied by a
DHCP server in the network
Manual: manual setting of ip­adress
setting of artnet net adress
(for consoles running ArtNet 3)
setting of artnet subnet
setting of artnet universe
display the ArtNET/DMX­adress
( 5 Ch = <001­508>)
(49 Ch = <001­464>)
(54 Ch = <001­459>)
(default setting = 1)
setting of preheat
(default setting = 0)
25