Faytech 1500 Bedienungsanleitung Seite 22

Installation of the Touch-Driver under Windows
mouse but if you do not have a PS / 2 mouse you should leave this box
unchecked to avoid compatibility problems.
5. :We recommend "None" (see the picture upper right) for the
" Setup Type "
calibration setting. A calibration will be performed every time your PC starts up
if you choose "Every system boot up". If you choose "Next system boot up" a
calibration will be performed on the next system reboot. You can carry out a
calibration at any time after the TouchKit program is installed. (See "Setting up
the faytech Touch software".) After making your selection on this screen, click
"Next".
6.
"TouchKit - InstallShield Wizard"
"OK". If the "New Hardware Found" dialog of Windows opens, please cancel it.
7. : If you plan to use multiple monitors, please choose this box.
"Setup Type"
(See "Setting up the faytech Touch software".)
8. : Accept the default destination or choose your
"Choose Destination Location"
own then press "Next".
: Connect the USB cable now and press
40 faytech Ltd. 2009
C
Installation of the Touch-Driver under Windows
9. " ": Give the program a name or use the default
Select Program Folder
setting and press "Next".
10." ": The installation will be started automatically with the
Setup Status
selected settings.
11.The installation is successfully completed when the following window appears:
If the USB controller icon is not showing, please disconnect the USB cable from
your PC and connect it again. For more help, Please go to the
" " section.
Troubleshooting
41