Enjoying Music According To Your Mood - Sensme; Installing "Sensme™ Setup" And "Content Transfer" In Your Computer - Sony CDX-DAB8700U Bedienungsanleitung

Notes
• Do not use USB devices so large or heavy that
they may fall down due to vibration, or cause a
loose connection.
• Do not detach the front panel during playback
of the USB device, otherwise USB data may be
damaged.
Changing display items
Displayed items may differ depending on
the USB device, recording format and
settings.
Press .
Notes
• The maximum number of displayable data is as
follows.
– folders (albums): 128
– files (tracks) per folder: 500
• It may take time for playback to begin,
depending on the amount of recorded data.
• DRM (Digital Rights Management) files may
not be played.
• During playback or fast-forward/reverse of a
VBR (Variable Bit Rate) MP3/WMA/AAC file,
elapsed playing time may not display
accurately.
• Playback of the following MP3/WMA/AAC
files is not supported.
– lossless compression
– copyright-protected
14
Enjoying music according
to your mood — SensMe™
The "SensMe™ channels" features
automatically group tracks by channel, and
allow you to enjoy music intuitively.
Installing "SensMe™ Setup"
and "Content Transfer" in
your computer
The software ("SensMe™ Setup" and
"Content Transfer") is required to enable
the SensMe™ function on this unit.
1
Download the "SensMe™ Setup" and
"Content Transfer" software from the
support site.
2
Install the software in your computer.
For more details on the installation, visit
http://support.sony-europe.com/
Registering a USB device
using "SensMe™ Setup"
USB device registration is required to
enable the SensMe™ function on the unit.
If registration is not performed along with
the installation procedure, follow the steps
below.
1
Start "SensMe™ Setup" on your
computer.
2
Connect a USB device to your
computer.
3
Complete registration following the
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be
unregistered again.