Battery Mounting - Carson Mini Tyrann Pro 260 Betriebsanleitung

5. Nick sensitivity – Expert mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/tail rotor key until the five-point dotted line symbol
starts to flash (see picture beside). Press nick trim to set the sensitivity
and then hold down the nick/roll stick for 1 second to confirm and
exit.
GB
6. Roll sensitivity – Expert mode
Hold down the nick/roll) stick for 1 second to enter the setting status.
Press the throttle/tail rotor key until the five-point dotted line symbol
starts to flash (see picture beside). Press roll trim to set the sensitivity.
And then hold down the nick/roll stick for 1 second to confirm and
exit.
g. Battery Mounting
Caution:
• Do not mix old and new batteries/rechargeable batteries.
• Do not mix different types of batteries.
• Do not charge non-rechargeable batteries.
1
Release the screw.
4
30 CARSON Mini Tyrann Pro 260 • 50 050 7038
2
Take away the battery cover.
Push
Return the cover.
Pull
According to the correct polarities, install
5
Fasten the screw.
Flashing
Flashing
3
4 x AAA batteries.