Input Key Function; Battery Mounting - Carson EASY TYRANN 225 SPY Betriebsanleitung

Input key FunctIon

S/n identification
1
Left control lever
2
Right control lever
3
Nick trim
4 Rotate trim
5 On/off switch
6 Throttle trim
7 Expert mode switch
8
Photo/video button
9
Control mode

battery mountIng

Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
1
Unscrew the screw from the battery compartment cover. Remove
the battery compartment cover.
3
Close the battery compartment again.
Function
Moving the control lever forwards or backwards makes the copter climb or dive. Moving the
control lever to the left or right makes the copter rotate to the left or right.
Moving the control lever forwards or backwards makes the copter move forwards or back-
wards. Moving the control lever to the left or right makes the copter rotate to the left or right.
Nick trim adjusts the forwards and backwards movement.
The rotate trim adjusts the rotation to the left or right.
The transmitter is switched on by pressing the pushbutton.
Throttle trim regulates climb and descent
Pressing the switch alters the copter's agility
Press this button to take photos or record a video
Also press this button to switch between mode 2 and mode 4.
• Do not attempt to charge non-rechargeable batteries.
Insert fresh AA Mignon batteries with the correct polarity in the
battery compartment.
2
23 // GB