Input Key Function; Reversing Channel Setup - Carson Mini Tyrann Pro 260 Betriebsanleitung

d. Input Key Function
S/N Identification
1 Throttle/Tail rotor stick
2 Nick/roll stick
GB
3 Roll trim
4 Nick trim
5 Tail rotor trim
6 Throttle trim
7 On/Off power switch
8 Antenna
e. Reversing Channel Setup
1. Nick reverse setup
Hold down the nick/roll stick for 1 second to enter the setting status.
Press nick trim key up or down to choose reverse. And then hold down
the nick/roll stick for 1 second to confirm and exit.
2. Roll reverse setup
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the roll trim key left or right to choose reverse. And then hold
down the nick/roll stick for 1 second to confirm and exit.
3. Rudder (tail rotor) setup
Hold down the nick/roll stick for 1 second to enter the setting status.
Press rudder trim key left or right to choose reverse. And then hold
down the nick/roll stick for 1 second to confirm and exit.
28 CARSON Mini Tyrann Pro 260 • 50 050 7038
Function
Forward and backward movement of the stick makes the helicopter ascend and descend
respectively. Left and right movement of the stick will rotate the helicopter's fuselage left/
right respectively.
Forward and backward movement of the stick makes the helicopter move forward and
backward respectively. Left and right movement of the stick makes the helicopter drift
sideways left/right respectively.
Aileron trim subsidiary adjusts left and right drift.
Elevator trim subsidiary adjusts forward and backward movement.
Rudder trim subsidiary adjusts left and right rotation.
Throttle trim subsidiary adjusts ascent and descent.
Pushing up switches on the power transmitter, pulling down
switches it off.
Transmits wireless signal
T
X
M1
T
X
M1
T
X
M1
M2
M2
M2