Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual DMX
Fix Position
Internal Program
Function
System Setting
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select "DMX Address" by pressing Up or Down.
• Press the Enter-button, adjust the DMX address by pressing Up or Down.
• Press the Enter-button to confirm.
• Press the Menu-button in order return to the main menu.
Lamp on or off
With this function you can switch the lamp on or off via the Control Board.
• Select "Lamp Control" by pressing Up or Down.
• Press the Enter-button, the display shows "ON" or "OFF".
• Press Up or Down to select "ON" if you wish to strike the lamp or "OFF" in order to switch it off.
• Press the Enter-button to confirm.
• Press the Menu-button in order to return to the main menu.
Lamp on by power on
With this function you can select if the lamp will be switched on when switching the power on. Select "ON"
by pressing Up or Down if you wish to enable this function or "OFF" if you don't.
No DMX signal
With the function "No Signal", you can set different modes if there is no DMX-signal.
• Select "No Signal" by pressing Up or Down.
• Press the Enter-button.
• Press Up or Down to select between "Close Shutter", "Hold", "Sound Mode" or "Auto Program".
• Press the Enter-button to confirm.
• Press the Menu-button in order to return to the main menu.
Close Shutter
With this function, you can close the shutter and set the device to center position if there is no DMX-signal.
This mode equals the settings Auto = OFF and Music = OFF.
Hold
With this function, the device remains in the last received DMX-program if there is no DMX-signal.
Auto Program
With the function "Auto Program", you can set the device to auto run if there is no DMX-signal.
Music Mode
With the function "Music Mode", you can set the device to sound-controlled program-run if there is no DMX-
signal.
PAN Reverse
With this function you can reverse the Pan-movement.
TILT Reverse
With this function you can reverse the Tilt-movement.
PAN = XXX ...
Password=XXX
Color wheel=XXX ...
Master/Alone
33/36
Manual adjustment
Wheel adjustment
to standard position password „050"
Auto program
00088759, Version 1.0
Werbung
Inhaltsverzeichnis
