EuroLite BE-200 Barrel Effect Bedienungsanleitung Seite 34

Microphone sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
• Select "Microphone level" by pressing Up or Down.
• Press the Enter-button.
• Press Up or Down to select the desired sensitivity.
• Press the Enter-button to confirm.
• Press the Menu-button in order to return to the main menu.
Display Reverse
With this function you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
Adjust the display language
With this function, you can adjust the display language.
• Select "Language" by pressing Up or Down.
• Press Enter to confirm.
• Press Up or Down to select "English" or "Chinese".
• Press the Enter-button to confirm.
• Press the Menu-button in order to return to the main menu.
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
Information
Current Hours
With this function, you can display the temporary running time of the device from the last power on. The
display shows "XXXX", "X" stands for the number of hours. The counter is reset after turning the device off.
Life Hours
With this function, you can display the running time of the device. The display shows "XXXX", "X" stands for
the number of hours.
Last Run Hours - individual fixture running time
This function allows the operator to record the operating hours of the device, according to his requirements.
You can use the counter to document the operating hours since the last service, for example, or to document
the operating hours from a rental. Individual operating hours can be reset at any time. The display shows
"XXXX"; "X" stands for the number of hours.
Clear individual fixture running time
With this function you can clear the individual running time of the device (last run time).
• Select "Clean last run" the appropriate arrow button.
• Press the Enter-button to confirm.
• Press the appropriate arrow button, the display shows "ON" or "OFF".
• Press the Enter-button to confirm.
• Press the Menu-button in order to return to the main menu.
Temperature
Head Temperature
With this function you can display the temperature in the projector (near CMY-filter) in degree Celsius.
Reset
With this function you can reset the device via the Control Board. You can select the different Reset-
functions by pressing Up or Down.
34/36
00088759, Version 1.0