Replacing The Fuse; Technical Specifications - Omnitronic ASS-1023 Bedienungsanleitung

Replacing the Fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
..............................................................................................................................................................................
9

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption :
Power output sine:
Subwoofer:
Column speakers:
Components:
Subwoofer:
Column speakers:
Frequency range:
Subwoofer:
Column speakers:
Max. SPL
Subwoofer:
Column speakers:
Inputs:
Microphone input:
Line input:
Column speakers:
Dimensions (LxWxH):
Subwoofer:
Column speakers:
Weight:
Subwoofer:
Column speakers:
ASS ASS- - - - 1023 ASS ASS 1023 1023 1023
400 W RMS
200 W RMS
2 x 25 cm woofer (10")
8 x 8 cm mid-high driver (8 x 3")
45 - 180 Hz
120 Hz - 20 kHz
120 dB (1 m)
118 dB (1 m)
combination XLR/6.3 mm jack, bal.
combination XLR/6.3 mm jack, bal. and RCA L/R
480 x 625 x 400
106 x 131 x 825
24 kg
8.5 kg
19
115/230 V AC, 50/60 Hz ~
200 VA (1/8 Power)
500 W RMS
350 W RMS
38 cm woofer (15")
12 x 8 cm mid-high driver (12 x 3")
45 - 180 Hz
120 Hz - 20 kHz
122 dB (1 m)
121 dB (1 m)
Speaker
645 x 490 x 535
105 x 130 x 1210
29.5 kg
12 kg
ASS- - - - 1503 ASS ASS ASS 1503 1503 1503