Herunterladen Inhalt Inhalt Diese Seite drucken

MIA IKP 2210 Bedienungsanleitung Seite 15

Induktions-doppelkochplatte
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

safety reason in all cases then. If short circuit or open sensor do not use the unit anymore
but give to a qualified electrician for check. When overheated, you can use the unit again
after minimum 20 min. of cooling downby plugging in and switching on the ON/OFF switch.
If the unit displays the error code E-3: the automatic voltage protection has been activated.
This can happen if there is voltage fluctuation over 270 V (e.g. when lightning during
thunderstorm). Please note that as soon as the current is normal again E-3 goes back to
normal function. In this case for safety reason please unplug. Please do not use again before
the current will be normal again.
If the unit displays the error code E-4: the automatic voltage protection has been activated.
This can happen if there is voltage fluctuation lower than 140 V (e.g. in countries which have
problems with their electric network). Please note that as soon as the current is normal again
E-4 goes back to normal function. In this case for safety reason please unplug. Please do not
use again before the current will be normal again.
If the unit displays the error code E-5: the automatic voltage protection has been activated.
This can happen if there is voltage fluctuation (current) is over or under the normal voltage
range (e.g. in countries which have problems with their electric network). Please note that as
soon as the current is normal again E-5 goes back to normal function. In this case for safety
reason please unplug. Please do not use again before the current will be normal again.
Do not place any ferro-magnetical objects near the appliance (i.e. TV, radio, credit cards, cassettes
etc.) Do not place any empty cookware on the glass field. Heating an empty pot or pan activates the
overheating protection and the device will turn off after a while.
Do not operate the device if it is damaged in any way or does not function properly.
Do not operate it when the appliance or any parts of it are damaged to avoid all risks. The appliance
is damaged when there are any cracks, excessively broken or frayed parts, distorsions or leaks. In
this case, immediately stop to use the appliance and return the entire appliance (including any parts
and accessories) to an authorized service center for examination and repair.
After each use let the device cool down sufficiently and clean it with a slightly damp cloth to prevent
the surface from damage. Always handle with care. Do not use any abrasive cleaners or cleaning
pads to avoid damage. Do not use any sharp or hard objects while cleaning the device. Do not leave
any food residues dry on the surfaces of the appliance.
Make sure to store the appliance on a dry clean place, safe from frost, excessive strain (mechanical
or electrical shock, heat, moisture) and out of the reach of children.
The use of accessories and spare parts that are not recommended by the manufacturer may cause
damage to the device or injuries to person.
Unplug the appliance
-
after each use and when the appliance is not in use
-
before changing accessories or cleaning the appliance
To unplug the appliance never pull on the cord, take the plug directly at its housing and unplug.
From time to time check the cord for damages. Never use the appliance if cord or appliance shows
any signs of damage as it could be dangerous.
Do not operate appliance when:
-
power cord is damaged
-
it has fallen down and shows visible damage or malfunction
In that case appliance must be sent to next service centre to avoid any risks.
If the power cord damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified person (*) in order to avoid a hazard. All repairs should be made by a competent qualified
electrician (*). Never try to open or repair the appliance yourself to avoid the risk of electrical shock.
(*)Competent qualified electrician: after sales department of the producer or importer or any person who is
qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case
you should return the appliance to this electrician.
15

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis