Safety Functions - MIA IKP 2210 Bedienungsanleitung

Caution! Danger of electric shock! Do not immerse cord, plug or appliance in water or other
liquid to avoid any risk of electrical shock.
- never place the appliance on wet ground
- to avoid electrical shock or short circuit never let the cord hang into water, other liquids or over
the washing basin
- do not use the appliance while standing on wet ground or if hands or the appliance are wet
- do not pour or drip any liquids at the motor base or cord. When liquids are spilled on the
base, immediately switch OFF, unplug and let dry the motor base thoroughly
- never wash the appliance and power cord in the dishwasher
Please note: To avoid damage of the cooking plates: After switch off cookware which still
contains hot food must be removed of the cooking plates immediately. Otherwise the
cooking plates could be damaged by remaining heat in the bottom of the cookware. Damages
caused by remaining heat off cookware are not secured and the manufacturer will assume no
liability in this case.
Caution! Danger of burning and fire! Never touch the heated surfaces with the hands or other
parts of skin. Never place other objects than cookware on the appliance when it is connected
to the power supply. Do not place empty pots or other empty cookware on the applliance
when it is operating.
When operating electrical heating-appliances (such as hot plates, hot pans or hot fat) please beware
that high temperatures are achieved which may cause serious injuries. Please use handles or pot
cloth if necessary. Inform other people using this appliance as well.
Use the item only on heat-resistant surfaces, such as stone or ceramics and do not place the
appliance near or on hot surfaces or near other strong heating devices.
To avoid heat congestion do not directly place the appliance next to a wall or under a wall-
cupboard. Make sure there is sufficient safe distance towards items which may easily melt or
inflame. Do not store any objects which may easily melt or inflame near the appliance.
Do not block the air supply and ventilation of the appliance.
Never place or use the appliance on carpets or cloth or other objects which are easily inflammable.
Do not place any kind of tissues or cloth or other objects which are easily inflammable under or on
the appliance to avoid the risk of fire or electrical shock. Never store inflammable products near the
appliance, they could catch fire.
Do not place any empty containers, pots or any metal objects on the device while in operation.
Do never overheat the cookware.
Do never pull on the cord to move the appliance. Do never move the appliance while in operation or
with hot cookware on it. Danger of burning!
In case of flames never try to extinguish with water but take a damp cloth.

Safety functions:

If the unit displays the error code E-0 and several signal tones are sounding: no cooking
ware has been put on the cooking plate, or the cooking ware has been removed or is not
suitable for using with this induction cooking plate (means less than 10 cm diametre); in this
cases there will be auto shut off (standby mode) after approx. 1 minute.
If the unit displays the error code E-1 and several signal tones are sounding: the induction
cooking plate has been overheated (e. g. by cooking too long time with too high temperature)
and the heating function has been switched off automatically. Please note, that in this case
the unit will activate automatically as soon as it has been cooled down.
For safety reason unplug and let the unit cool down. Then you can use the unit again by
plugging in and switching on the ON/OFF switch.
If the unit displays the error code E-2 and several signal tones are sounding, the unit has
been overheated by too hot cookware, short circuit or fail function of the temperature sensor.
The unit has switched off heating. The boil dry protection has been activated. The unit has
been overheated over approx. 250°C. All functions have been cancelled. Please unplug ifor
14
motor