Herunterladen Inhalt Inhalt Diese Seite drucken

Tunze Comline Serie: 3166 Gebrauchsanleitung Seite 21

Filter und bio-hydro-reactor
Vorschau ausblenden Andere Handbücher für Comline Serie: 3166:
Inhaltsverzeichnis

Werbung

Comline Filter 3166/3166.50 and Bio-Hydro-Reactor
3179 use a Magnet Holder 6200.50, whereas Filter
3167/3167.50 uses two magnet holders.
In delivery condition, the magnet holder is in the
lower position (1). If the magnet holder is mounted
to the top position (2), suction holder supplied has to
be attached to the bottom.
When applied with an Osmolator, we recommend
to attach the magnet holder to the lower position (1)
because otherwise the sensor function could be put
out of operation by the magnetic field.
Prepare a suitable position on the glass pane.
The glass pane should be free from algae inside
the aquarium, and should be dry and clean on the
outside.
Use the magnet holder to attach the Comline
towards the aquarium pane.
Hold the outside part of the magnet holder to the
inside part, and then carefully bring together (3).
In order to move the Comline into another position
without damaging the elastic buffer, the outside
magnets should be slightly lifted away from the
glass.
Comline Filter 3166/3166.50 et Bio-Hydro-Reactor
3179 utilisent un Magnet Holder 6200.50, Comline
Filter 3167/3167.50 utilisent deux Magnet Holder.
A la livraison, le Magnet Holder est monté en
position basse (1). S'il devait être déplacé en
position haute (2), il serait nécessaire d'appliquer
en position basse la ventouse livrée.
Lors de l'utilisation de l'Osmolator, nous conseillons
de placer le Magnet Holder en position basse (1).
Dans le cas contraire, le capteur magnétique se
trouve influencé par l'aimant de fixation.
Préparez l'emplacement du support magnétique sur
la vitre. La surface interne de l'aquarium doit être
libre d'algues, la surface externe sèche et propre.
Positionnez Comline avec le Magnet Holder interne
dans l'aquarium, tampons élastiques contre la vitre.
Positionnez l'aimant externe face à l'aimant
interne (3) puis amenez les deux parties délicatement
face à face.
Afin de déplacer Magnet Holder sans endommager
les tampons élastiques, il est important de soulager
l'aimant externe de la vitre.
21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3166.503167.50316731793166

Inhaltsverzeichnis