Setting The Date And Time; Using The Alarm Feature; Set The Alarm - Topcom butler 930 big button Bedienungsanleitung

Butler 930
9 Setting the clock and alarm
9.1 Date and time format
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
Format'.
• Press 'Select' to confirm.
• Use the up or down key
time format '12-Hour' / '24-Hour'.
• Press 'Save'
13
saving.
9.2

Setting the date and time

• Press the left 'Menu'
If you have Caller id on your telephone line and the operator sends date
and time, your clock will be set automatically on an incoming call.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the current date/time by the numeric keypad.
• Press 'Save'
13
saving.
9.3

Using the alarm feature

Set the date and time and use your handset to give you a reminder alarm. You can have
different alarm settings for each handset registered to your base. The alarm rings only at the
handset, not at the base or any other handset.
If one of the alarms is set, the alarm set icon
When the alarm sounds, press any key to turn it off.

9.3.1 Set the alarm

• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
18
/
15
/
15
/
15
/
7
15
to confirm your selection or press 'Back'
key.
13
/
15
/
15
/
15
to confirm your selection or press 'Back'
/
15
/
15
/
15
7 repeatedly until 'HS Settings' is selected.
7 repeatedly until 'Date & Time' is selected.
repeatedly and select 'Date Format' or 'Time
7
to select the date format 'DD-MM' / 'MM-DD' or
7 repeatedly until 'HS Settings' is selected.
7 repeatedly until 'Date & Time' is selected.
repeatedly and select 'Set Date' or 'Set Time'.
7
appears in standby mode on the display.
7 repeatedly until 'HS Settings' is selected.
7 repeatedly until 'Alarm' is selected.
repeatedly and select 'On' or 'Off'.
7
to leave the menu without
5
to leave the menu without
5
Butler 930