Text Programming; Clerk Names - Sharp XE-A213 Bedienungsanleitung

5.
Function programming (Press
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press
display "SUBDEPT".
:
Each time
"SUBDEPT" and "PLU" alternatively.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
s
(2) Press the
Immediately after displaying current text setting and
the corresponding PLU code for the next PLU,
guidance message will be displayed.
The PLU code is automatically incremented for a
new direct PLU key programming, and ready for
text programming for the incremented PLU code.
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
6.
Terminate programming
A
(1) Press the
programming.
8

Text Programming

Please refer to "Guidance for text programming" on page 14 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
start programming with the
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter. Referring to the corresponding "Procedure", enter a parameter and start
character entries.

Clerk names

s
5
24
s
to skip
key is pressed, the display shows
key to register the setting.
key to terminate direct PLU key
s
key, the cash register will automatically be ready for text entry.
(12 digits)
P
Clerk no.
(1-25)
To program another clerk
A
. / Press to terminate.)
:
key to
PLU code
Item name
To keep current setting
@
Character keys
(max. 12 digits)
s
PLU.0072
ENTER[00]KEY
A
Print
PLU/subdept. 1/0
Unit price
Associated dept.
P
key for text entry just after you
s A
0072
0.00