Sharp XE-A213 Bedienungsanleitung Seite 20

1. Specify the department code.
(1) For dept.1 through 6, press the department key.
Or enter dept. code using numeric key, and then
d
press the
Immediately after displaying the current text data and
the corresponding dept. key code you entered,
guidance message for the next step will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Unit price programming (Press
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Entry type programming (Press
:
(1) Press key 3 times to display "PRESET".
:
Each time
"INHIBITED", "OPEN", "PRESET" and "OPEN &
PRESET" in this order.
Default setting is "OPEN".
When the unit price is changed from the default
setting ("0") in step 3, "OPEN & PRESET" will be
displayed first.
However, when the default setting is not changed,
"OPEN" will be displayed first.
18
key.
s
to skip. / Press
@
and key moves the cursor to
key to register the item name.
s
key to register the unit price.
s
key is pressed, the display shows
Key operation
A
to terminate.)
A
to skip. / Press to terminate.)
A
to skip. / Press to terminate.)
Operator display
6 DEPT.06
ENTER[00]KEY
:
ENTER TEXT
DEPT.06
BOOK
BOOK
s
PRICE
300
s
DEPT ENTRY TYPE
OPEN & PRESET
: : :
06
0.00
300
PRESET