Programming For - Sharp XE-A213 Bedienungsanleitung

6. Discount calculation (for the subtotals) programming (Press
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
"SBTL DISABLE".
:
Each time
"SBTL DISABLE" and "SBTL ENABLE" alternatively.
Default setting is "ENABLE".
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
7. Percent rate limit programming (Press
(1) Enter percent rate limit using numeric key.
The rate limit can be set from 0.00 to 100.00.
Default setting is 100.00.
s
(2) Press the
8. Terminate programming
A
(1) Press the
programming.
Item:
A Discount calculation
(for the items)
B Discount calculation
(for the subtotals)
C Always 0 is printed.

Programming for

1. Specify the key to program.
V
(1) Press the
Immediately after displaying "EXCHANGE PROG.",
guidance message for the next step will be displayed.
56
:
key to display
key is pressed, the display shows
key to register the setting.
key to register the setting.
%
key to terminate the
V
V
key to enter programming.
s
to skip. / Press
key
Selection:
Enable*
Disable
Enable*
Disable
Key operation
s
to skip. / Press
s
% HALO PROG.
A
to terminate.)
90.00
s
ENTER[TL/NS]KEY
A
Print
Text
Percent rate
Sign
Percentage rate limit
Print:
0
1
0
1
0
Operator display
V
EXCHANGE PROG.
ENTER[00]KEY
A
to terminate.)
100.00
90.00
0.00
From left, ABC