13.1.6 Laser
13.1.7 Dust extraction
13.1.8 Miter cut
13.1.9 Tile cut
13.1.10 Plastic cut
13.1.11 Guide rails
HOLZMANN MASCHINEN GmbH
On/Off with switch (2)
Line the laser up with cutting
marks on your workpiece
Always use a dust extraction
Plug the small end of the dust
extraction hose (C) with the
dust collector plug (17)
Connect the bigger end of C
with a vacuum device
Use for miter cuts the miter
base (H)
Lift the lock lever to release the
angle setting clamp (c)
Move to the desired angle
Lock the angle setting (c)
Tighten the workpiece with
clamp (a)
For cutting tiles always use
diamond saw blade (D)
For cutting plastic and
aluminium always use HSS-saw
blade (F)
For long cuts use the guide
rails (G)
If you stuck all 3 guide rails
together a maximum length of
1,26,m is possible
www.holzmann-maschinen.at
UNIVERSAL TAUCHKREISSÄGE / MINI PLUNGE SAW
OPERATION
Seite 26
TAS 89M