Door Reversibility - AEG S83600CSW1 Benutzerinformation

8.6 Door reversibility

WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the
doors of the appliance during
the operations.
• Open the doors. Unscrew the middle
hinge (B). Remove the plastic spacer
(A)
• Remove the spacer (F) and move to
the other side of the hinge pivot (E).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C, D) and move to the
other side.
• Fit the pin of the middle hinge (E) into
the left-hand hole of the lower door.
A
E
C
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
B
F
D
• Re-insert the cover (A) on the opposite
side.
A
• Remove the handle. Unscrew the top
handle bracket from the handle rod
(1). Unscrew the bottom handle brack-
et from the door (2)
• Unscrew the top handle bracket from
the door (3).
• Re-screw the handle bracket on the
door (4). Turn the handle bracket with
the handle and screw them to the
door (5) and the fitted handle bracket
(6).
1
2
4
• Remove using a tool the cover. (1).
• Unscrew the upper hinge pivot (2) and
place it on the opposite side.
• Re-screw the upper hinge.
• Fit the upper door on the upper door
pivot.
• Re-insert the upper door on the mid-
dle hinge pivot (3 )slightly tilting both
doors.
• Re-screw the middle hinge. Do not
forget the plastic spacer.
Do a final check to make sure that:
• All screws are tightened.
ENGLISH
37
B
C
3
5
6