KKT KOLBE Curve Benutzerhandbuch Seite 35

Installation
Fix the upper chimney on the upper chimney
bracket by two screws (4x8mm). Then fix the
upper chimney bracket on the wall. Before fixing
the bracket on the wall, you can decide about the
height of the upper chimney bracket fixing holes
for installation.
Finally, attach the outer shaft with 2x ST4
(8 mm) screws to the hood body.
Place the tray on the hood. Fasten the
lower chimney bracket to the wall with 2
screws (4 mm x 30 mm).
35 35