Control Panel - KKT KOLBE Curve Benutzerhandbuch

Installation

8. Control panel

Setting the clock:
In Stand-By-Mode, press the keys and at the same time for 1 second. The
Display will flash and turn into the setting-clock-mode.
By pressing the key , you can switch between the hour and minute setting. To
decrease the number, press . To increase the number, press . When you have
finished setting the clock, the appliance will exit the mode after about 5 seconds.
Setting the timer:
In working mode, press and for 1 second. The display will flash and turn into
setting-the-timer mode. Press the key to increase the timer in 15 minute steps.
leads to a decrease of the timer of 1 minute. The key
Pressing the key allows
an increase of the time of 1 minute.
Lights:
Press this key to turn on the LED lamps.
Long pressing of this button: Reset the memory indicator for the
carbon filter. If you have changed the carbon filter / no need to change
/ use the device with an air exhaust, press the lamp button for ca. 10
seconds. The indicator will disappear.
This icon automatically appears after 14 hours of operation or when you
turn on the appliance for the first time.
Power:
Press this button briefly to turn the appliance on / off. By pressing the button
longer the device opens / closes after / during filter change.
Airflow speed:
Press this button to switch between low, medium and high ventilation speed.
Here you can also switch to „TURBO"-speed, which is the highest ventilation level.
After 5 Minutes, appliance jumps to level 3.
Remote control:
This icon indicates that the appliance can be controlled by a remote control.
32