Herunterladen Inhalt Inhalt Diese Seite drucken

Caso Cuisine 2000 Bedienungsanleitung Seite 14

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating the device
Plug the power plug into a suitable outlet. 
The control lamp of the ON/OFF switch lights up and an acoustic signal
sounds.
Now the device is in standby mode.
Place suitable cookware in the centre of the hotplate.
Now press the ON/OFF switch 1. to turn the induction hotplate on.  T he control lamp
"Stage" blinks and an acoustic signal sounds.
Press the Function Key 4. The preset power stage "5" is selected and the device turns on.
With the + / - Keys (5+6), you can change the settings at any time in a range from 1 – 10
Press the Function Key 3. to select the temperature. The preset temperature stage "120°C"
is selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Timer Function.  A fter the selection of the temperature mode press the button Time 2.
until the corresponding control lamps blink. The display shows the number "0". With the
arrow keys, you can now select the operating time in 1-minute intervals (up to max. 180
minutes). Then the display counts down the duration in minutes. Once the time is up,
an acoustic signal sounds and the device automatically goes into standby mode.
Notice: during timer operation, you can change the duration at any time with the arrow
keys. With the memory function of the device, the power stage or temperature settings
remain unchanged here.
You can also change to the power stage selection or the temperature stage selection
with the "Function" button and change the settings there without changing the preset
time.
Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
Do not operate the device if it is damaged in any way or does not function properly. 
The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.
In case of "E05" appearing in the display the over heat protection has been activated.
This means that the temperature had increased to a temperature of 170°C. In this case the
device turns off automatically in order to avoid damages.
Therefore we recommend to select the function "Stufe" in case of steaming food or boiling
water for example.
In case of grilling or cooking deep fry food we would advise you to use the function
"Temperatur" as in this case you can use temperatures up to 240°C.
In case of "E05" please pull the power plug in order to reset the device. After this you can
use it again as usual.
14

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis