Confi Guring Date/Time Settings; Confi Guring Source Settings; Confi Guring Other Settings; Operation - Sharp LC-32LE140E Bedienungsanleitung

Note: If the Country option is set to France, you can
use 4725 as the default code.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format the
hard disk. Select "NO" and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using " " or " " key and press OK. USB
disk information will be displayed:
Confi guring Date/Time Settings
Select Date/Time in the Settings menu to confi gure
Date/Time settings. Press OK button.
• Use " " or " " buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL option
is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top of
the menu list will then change according to the selected
Time Zone.
If you have selected Country option in the First Time
Installation as Netherlands, Date/Time Settings will not
be available to be changed.
• Changes are automatically stored. Press
to exit.
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 31 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 31
Confi guring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
"SOURCE" button is pressed.
• Select Sources in the Settings menu and press OK
button.
• Press" " or " " buttons to select a source.
• Use " " or " " button to enable or disable the
selected source. Changes are automatically
stored.
Confi guring Other Settings
To view general confi guration preferences, select Other
Settings in the Settings menu and press OK button.
"MENU"

Operation

• Press " " or " " buttons to select an item.
• Use " " or " " button to set an option.
• Press OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
English - 31 -
28.03.2012 19:05:23 28.03.2012 19:05:23