Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
If the TV will not be used for a long period i.e.
holidays, then unplug the power cord from the
mains socket.
Standby Notifi cations
If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the
next switch-on:
When the Auto Tv Off timeout is reached, the following
message will be displayed on the screen. Select YES
to shut down the TV. Select NO to cancel. The TV
will switch off as well, if you do not make a selection
on this screen.
If the TV switches off owing to the auto power down
feature, the following on-screen message will be
displayed on the next switch-on:
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 14
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075634_50219198.indd 14
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
•
Press "
" button to decrease volume or "
" button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
•
Press "
P/CH + " button to select the next programme or
" P/CH - " button to select the previous programme.
Viewing Main Menu
•
Press "
" / "
to view main menu. In the Main menu select sub-
menu using " P/CH - " or " P/CH + " buttons and enter
the sub-menu using "
To learn the usage of the menus, refer to the menu
system sections.
AV Mode
•
Press the "
TV/AV " button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
•
The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
•
Press "
V " button to increase the volume.
Press "V " button to decrease the volume. A
volume level scale (slider) will be displayed on
the screen.
Programme Selection (Previous or Next
Programme)
•
Press "
CH " button to select the previous
programme.
•
Press "
CH " button to select the next programme.
Programme Selection (Direct Access)
•
Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the fi rst digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
English - 14 -
" buttons at the same time
" or "
" buttons.
28.03.2012 19:05:14
28.03.2012 19:05:14
Werbung
Kapitel
Inhaltsverzeichnis
