Faytech 7 INCH TOUCH MONITOR V2 Bedienungsanleitung Seite 53


Power supply error:
If the display has no signal input, there might be an error with the power supply. First please
check the connection with another power supply before you return the display. We're happy to
exchange the defective power supply if necessary.
 Panel shows "unsupported format": That means that the monitor receives a signal source
which cannot be displayed. This e.g. may happen when frequencies are set up over
75Hz. When you think the signal should be possible to be displayed please contact the
faytech service with detailed signal information.
Stripes / errors in the image

Pixel error: Each faytech display has been thoroughly tested and sold with no pixel
defects. If there is a pixel error at your display, please contact us for Support.

Text is hard to read, picture looks fuzzy: The display image is in the original resolution
(see specifications) clear. At higher resolutions the display interpolates. This leads to
inaccuracies and picture distortions.

Stripes / errors in the image: when connecting the display using power from a PC's power
supply, the power supply can cause a light flickering. This is because of the interference
created by the PC's power supply. In order to improve the picture, please try an
alternative power supply.

Image is upside down: Press (when there is a signal) the + button. This switches through
the two different modes (the original, top / bottom mirrored)
53