Faytech 7 INCH TOUCH MONITOR V2 Bedienungsanleitung Seite 50

On this tab you can finely adjust the touch area. This is very useful when you have problems
touching at the edges of the touch screen. In the following image you can see that the limits for
all edges of the screen were corrected (to 110%). E.g. if you have problems in the upper right
area, just increase the upper and right limit (>> Bigger ). Confirm the change and try the new
settings with the Draw Test. You can also use the X-axis and Y-axis displacement options to
compensate if your touch always seems to be off the same amount in the X and/or Y
directions.
The "Support Edge Compensation" option optimizes the touch detection in the corners of
your faytech touch panels. This option should always be enabled.
11. Hardware and About tabs:
The last two tabs are for information only - there are no options to select on these tabs.
The Hardware tab gives information about the design of the faytech touch display and the
firmware used.
The About tab gives information about the touch driver version as well as information about
the developer of the software.
50