Installation Of The Touch-Driver Under Windows - Faytech 7 INCH TOUCH MONITOR V2 Bedienungsanleitung

INSTALLATION OF THE TOUCH-DRIVER UNDER WINDOWS

faytech´s own 4/5-wire USB/serial TouchController series based on EETIs MER4485 chipset
supports the gesture control of Win7 and Win8 as well as the use of the touch already within
the LogIn window without further driver installation. We suggest to not install any additional
drivers under Win7 or Win8 operation system.
With first connection of the USB-cable Win7/Win8 installs automatically the right drivers. With
successful installation you see the following Windows information window. This first time
installation may take a little bit time. Afterwards, the touch function is usable.
Please use Win7/Win8 own settings for the touch panel to set it up to your system. The
Windows menus are under System, Hardware and Sound, Tablet PC-settings. More settings
are available under Pen- and Handsetting-menu, also located in the Hardware and Sound
menu.
For calibration purpose we suggest to install the calibration tool
„Win7,Win8_calibration_TOOL" which is available on faytech´s Driver DVD or at
www.faytech.com, Service, Driver.
For Win7, Win8 please just install the available drivers when you want to use Touch without
the gestures support as sole mouse alternative.
In the following, a Windows XP installation is described.
1. Put the DVD into your DVD- ROM.
2. Use the Explorer on the DVD and select the appropriate subdirectory (Touch Driver, then
the right operation system) to open the installation file setup.exe directly. Now you will see the
following window:
Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. If a security warning
pops up, click "Run", "Continue" or "Execute". Under Vista you must confirm the UserAccount
Control with "Continue". Some further warnings may be given depending on installed security
programs. Always click the button to continue the operation.
To complete the installation with all default options, click "Next" on each of the following dialog
boxes. You can cancel at any time. To switch back to a previous step, click the "<back" button.
Please note! The installation process is in English. Later on you can choose the language for
the OSD.
3."Welcome to the InstallShield Wizard for TouchKit":Press "Next" if you to continue the
installation.It's advisable to close all other programs before beginning this installation.