Additional Information - Samsung STB-E7500 Handbuch

Appendix

Additional Information

Note
TV Aspect Ratio
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
• If the product is connected to a device that does not support BD Wise, you can not use the BD
• For proper operation of BD Wise, set the BD Wise menu of both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
Settings • If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
PCM Downsampling
• HDMI
Anynet+(HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Selecting the Subtitle Language
• This function changes both the primary and secondary subtitles at the same time.
Media Play
• The total numbers of primary and secondary subtitles are displayed respectively.
• If you press the SUBTITLE button on the remote control, the subtitle bar appears.
64
|
English
then the picture might appear to be distorted.
appears in the Resolution menu.
Wise function.
DTS), the audio signal outputs as PCM.
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the product may output
48kHz.
manual of your TV.
Press the RETURN button to remove the subtitle bar.