Samsung STB-E7500 Handbuch Seite 24

Settings
Audio
Channel
24
|
English
| NOTE |
\ For users whose TV is the only sound-producing device:
\ If the DTV Program you are watching is produced according
Connected Device
\ Substantial number of AV Receiver / Home Theatre Device
Selects an appropriate type of antenna for digital
broadcasts.
Aerial
Before your product can begin memorizing the available
channels, you must specify the type of signal source
that is connected to the this product.
Select this to change the country.
Enter the desired 4-digit password using the number
buttons. Default password is set to 0000.
| NOTE |
Country
\ Password : Enter the desired 4-digit password using the
- If the TV does not support Dolby Digital bitstream input via
HDMI, no specific setting is required.
- If the TV supports Dolby Digital bitstream input via HDMI, set
"Digital Output" to "PCM".
By doing so, the "Connected Device" will not require further
setup.
to EBU R128, The Average Loudness between MPEG1 Layer2
Audio and Dolby Digital / Dolby Digital Plus audio can be
reduced. If the DTV Program do not meet the EBU R128,
There may be still some amount of difference of average
Loudness between a TV Programs.
decode Dolby Digital / Dolby Digital Plus with +4dB OFFSET
when compared to same encoding level of PCM input.
This kind of product include both THX Certified one and also
none THX Certified one.
If user select "AV Receiver(Offset mode)", the average
loudness between Dolby Digtial / Dolby Digital Plus audio
decoded by such a product and MPEG1 Layer2 Audio
decoded by this product will be similar.
number buttons.
- France, Italy : You can not set the password to "0000".
Please choose other numbers.
- Others : Default password is set to 0000.