Troubleshooting - Kenwood KDC-261UB Bedienungsanleitung

TROUBLESHOOTING

Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"PROTECT" appears and Check to be sure the terminals of the speaker wires are
no operations can be insulated properly, then reset the unit. If this does not solve
done. the problem, consult your nearest service center.
• Sound cannot be heard. Clean the connectors. ( 2)
• The unit does not turn on.
• Information shown on
the display is incorrect.
The unit does not work at Reset the unit. ( 3)
all.
• Radio reception is poor. • Connect the antenna firmly.
• Static noise while • Pull the antenna out all the way.
listening to the radio.
"NA FILE" appears. Make sure the disc contains supported audio files. ( 10)
"NO DISC" appears. Insert a playable disc into the loading slot.
"TOC ERROR" appears. Make sure the disc is clean and inserted properly.
"PLEASE EJECT" appears. Reset the unit. If this does not solve the problem, consult your
nearest service center.
Disc cannot be ejected. Press and hold
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit. ( 3)
"READ ERROR" appears. Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
"NO DEVICE" appears. Connect a USB device, and change the source to USB again.
"COPY PRO" appears. A copy-protected file is played.
to forcibly eject the disc. Be careful not
Symptom Remedy
"NA DEVICE" appears. Connect a supported USB device, and check the connections.
"NO MUSIC" appears. Connect a USB device that contains playable audio files.
"iPod ERROR" appears. • Reconnect the iPod.
• Reset the iPod.
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as Playback order is determined when files are recorded.
you intended them to play.
"READING" keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not This is caused by how the tracks are recorded.
correct.
Correct characters are not This unit can only display uppercase letters, numbers, and a
displayed (e.g. album limited number of symbols. Uppercase Cyrillic letters can also
name). be displayed if [RUSSIAN SET] is set to [РУССКИЙ BКЛ]. (
5)
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial
telephone accessory. ( 13, 14)
When a call comes in, "CALL" appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press SRC.
"CALL" disappears and the audio system resumes.
When the call ends, "CALL" disappears. (The audio system resumes.)
ENGLISH | 11