Kenwood KDC-261UB Bedienungsanleitung Seite 7

GETTING STARTED
SYSTEM
KEY BEEP ON: Activates the keypress tone. ;
OFF: Deactivates.
SOURCE SELECT
BUILT-IN AUX ON: Enables AUX in source selection. ;
OFF: Disables. ( 8)
RUSSIAN SET Selects the display language for
[FUNCTION] menu and Tag information
(folder name, file name, song title, artist
name, album name) if applicable.
RUSSIAN OFF: Display language is
English. ; РУССКИЙ BКЛ: Display
language is Russian.
P-OFF WAIT Applicable only when the demonstration
mode is turned off.
Sets the duration when the unit will
automatically turns off (while in standby
mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ;
60M: 60 minutes ; OFF – – –: Cancels
CD READ 1: Automatically distinguishes between
audio file disc and music CD. ; 2: Forces
to play as an music CD. No sound can be
heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ;
NO: Cancels (upgrading is not activated).
For details on how to update the
firmware, see: www.kenwood.com/
cs/ce/
RADIO
Search for a station
1 Press L SRC to select TUNER.
2
Press BAND repeatedly (or press
LW.
3
Press / (or press
• To change the searching method for
AUTO1: Automatically search for a station.
AUTO2: Automatically search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number
buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM) or "– – – –" (for MW/ LW) appears on the display.
2
Press the number buttons to enter a frequency.
3 Press ENT to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Other settings
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table), then press the knob.
3
Press and hold to exit.
To return to the previous setting item or hierarchy, press
AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ MW/
*
/ (+) on RC-406) to search for a station.
/ : Press SEEK repeatedly.
KDC-130Y
(for )
2 , Direct Access Tuning is automatically canceled.
.
ENGLISH | 5