Inserting The Drive Battery; Start - Carson FD Rapscallion Betriebsanleitung

InSertIng tHe DrIVe battery

1
Turn the lock to the right or left and open the cover.
3
Connect the battery to the boat's speed controller.

Start

1. First switch the model on (LED flashes).
2. Connect the battery to the boat's speed controller.
important:
the boat is not yet ready to use!
1
Gb // 20
on
2
2
Place the battery pack in the mount provided.
4
Close the cover and secure the catch again.
3. Next put the boat into the water.
4. The LED on the transmitter will now glow steadily.
5. When you hear an audible signal "di-do-di" the boat is ready to
use.
2