Input Key Function; Battery Mounting - Carson Easy Tyrann 180 Water Rescue Betriebsanleitung

Input key FunctIon

S/n identification
1
Left control lever
2
Rotate trim
3
On/off switch
4
Right control lever
6 Charging connector
7 Frequency selection A/B

battery mountIng

Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
1
Remove screw of the battery-cover. Remove the cover.
3
Close the battery-case.
GB // 22
Function
Moving the control lever forwards or backwards makes the copter climb or dive.
The rotate trim adjusts the rotation to the left or right.
Pressing the switch alters the copter's agility
Moving the control lever forwards or backwards makes the copter move forwards or back-
wards. Moving the control lever to the left or right makes the copter rotate to the left or right.
Charging the helicopter via the transmitter
frequency "A", or frequency "B"
• Do not attempt to charge non-rechargeable batteries.
Put fresh AA Mignon batteries with correct polarity into the
battery-case.
Mount the screw of the cover again.
2
4