Subtitle Language; Camera Angle; Changing The On-Screen Display - Denon DVD-700 Bedienungsanleitung

PLAYING A DISC

Subtitle Language

The DVD player allows you to select
a subtitle language during DVD disc playback (if available).
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3 To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
1.ENG/6
2.FRE/6
OFF
NOTES:
• Some discs allow audio language setting/subtitle language
setting from the disc menu. (The operation varies between
discs, so refer to the instructions accompanying the disc.)
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guage, '---' will be displayed instead. (Refer to page 26.)

Camera Angle

Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the ( ) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select the
desired angle.
1 / 8
2 / 8
8 / 8
DVD-V
Subtitle 1
Subtitle 2
OFF
DVD-V
Angle 1
Angle 2
Angle 8
– 22 –

Changing the On-Screen Display

You can check information about the
current disc by pressing the DISPLAY button on the remote
control.
1
Press the DISPLAY button during
playback to show current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
2 Press the DISPLAY button again to show the current
Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press the DISPLAY button a third time.
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a two layer
disc, the layer number will also
be displayed ( L0: Layer 0 is play-
ing. L1: Layer 1 is playing).
4
Press the DISPLAY button a
fourth time to remove the display.
CD VCD
1 Press the DISPLAY button during playback.The
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show the cur-
rent Total Track time.
• The elapsed and remaining playing time of the current
track will be displayed.
3 Press the DISPLAY button a third time to remove the
display.
DVD-V
9/49 0:00:00 -0:00:00
IIII
T
MP3 JPEG WMA
EN