Setting Up And Connecting The Appliance - Dometic D15 Bedienungsanleitung

Setting up and connecting the appliance

8 Setting up and connecting the
appliance
8.1 Notes on setting up the appliance
When selecting the location, observe the following instructions:
• The ambient temperature should be in accordance with the climate class
mentioned for your country in the supplementary brochure. Otherwise, it is
possible that the inner temperature you set cannot be reached or maintained.
This could also be the case if there are extreme fluctuations in the ambient
temperature.
• The appliance should stand in the coldest part of the room, away from heat
sources (ovens, heating devices or radiators).
• The location must not be damp or wet.
• The appliance must not be exposed to direct sunlight. This can damage the
acrylic coating and lead to higher power consumption.
• The ground must be level and sufficiently stable to support the wine cellar at full
capacity.
• The appliance must be sufficiently ventilated. The ventilation slots on the front of
the appliance must not be obstructed.
• Note the information on the electrical connection, see chapter "Notes on the
electrical connections" on page 15.
• Remove all the inner and outer packaging material before setting up.
• Make sure the appliance is level by adjusting the feet.
8.2 Notes on installing the appliance
D15 and D50 can be built-in or free-standing.
Width
Depth
Height
14
Installation size
D15
300 mm / 11,8 "
590 mm / 23,2 "
870 mm / 34,3 "
D15, D50
D50
600 mm / 23,6 "
590 mm / 23,2 "
870 mm / 34,3 "
EN