Rear View - JVC TM-A101G Bedienungsanleitung

REAR VIEW

<Rear Panel>
10 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
@
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Video B terminals [VIDEO B IN/OUT]
11
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
#
terminals .
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
12 Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
0
terminal .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
VIDEO A
IN OUT
VIDEO B
IN OUT
AUDIO A
IN OUT
IN OUT
AUDIO B
INPUT ASPECT
REMOTE
13
14
0
.
VIDEO A
IN OUT
VIDEO B
IN OUT
AUDIO A
IN OUT
IN OUT
AUDIO B
INPUT ASPECT
REMOTE
Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
!
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Remote terminals
[REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A
or VIDEO B and ASPECT RATIO is available via external
control. External control is set in the <SET-UP MENU>
screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
External control switch
External control
Open circuit
functions
(open)
ASPECT RATIO 4–3 (4:3)
INPUT INPUT A
Note:
● Also refer to BASIC CONNECTION EXAMPLE on
page 12.
10
11
12
13
14
!
.
Closed circuit
(short)
16–9 (16:9)
INPUT B
5